KRAYMOKRAYMO / IC2 CLASSIC 1.19.2
BatBox: buffering and output orientation
Buffer power and connect machines to the correct side.
EU, ingredients and outputs need to be tested on KRAYMO, not taken from outdated versions.
Hands-on lab: verify it yourself
This diagram is a workflow, not an exact crafting recipe.
What to do
Feed energy into storage and check that its meter rises. Connect one machine to the intended output face and observe discharge.
Success criteria
Charge rises while fed and falls while the consumer runs; the machine is supplied reliably.
If the test fails
A charged unit may still have the wrong output orientation. Check the face and voltage compatibility separately.
Exact values require the same IC2 Classic version, server configuration and datapacks.
Verification journal · Not yet confirmed
| Modpack version | — |
|---|---|
| Input item / fuel | — |
| Power / connections | — |
| Actual output | — |
Exact values require the same IC2 Classic version, server configuration and datapacks.
Sources and version: IC2 Classic 1.19.x DataPacks ↗ · Verify real KRAYMO recipes
How to check
- Confirm that the BatBox charges from a generator. Then connect a single machine to the storage output face.
- Charge increases during generation and decreases while the machine runs.
- Inspect output orientation, cable compatibility and voltage tier.
Expected observation
Charge increases during generation and decreases while the machine runs.
If something goes wrong
Inspect output orientation, cable compatibility and voltage tier.
Maintainer source
IC2 Classic 1.19.x — datapacks ↗
Practical guides
Your first working IC2 Classic factory · Generator: your first EU source · EU cables: a reliable power grid · Macerator: material processing · Electric Furnace: dependable smelting · Compressor: compacting materials